Here at East End Machining we want be your #1 stop for all your R/C needs. If you don't see what you are looking for please drop us a line. There is a good chance we may have it or we will be able to get it for you.
EEM "The TAG" MOA Crawler Chassis
Product Description
EEM is proud to announce that we are now building and selling the Tag MOA Crawler Chassis.
The design was created and honed by EEM Team Driver Aaron Betzner. Aaron is better known to us all on the boards as The Eye.
Aaron has done a great job on the TAG design. The Tag is one of the narrowest chassis on the market. Coming in at right around the 2 inch mark. This chassis is built to get through tight spots. It’s incredibly compact design allows it to move through and over obstacles like no other chassis in it’s class.
The TAG chassis features an aluminum TVP chassis design, built around a CNC machined Delrin Skid Plate. The lower arms are set up in the now standard double reverse triangulation.
Competition proven in several comps on both the state and national level. The tag has proven itself built on both Berg and Hot Racing axles.
Here is a sample of some of it's placings:
2008 2nd East Coast 2.2 indoor challenge “PA” 3rd East Coast 2.2 indoor challenge “PA”
2009 6th Midwest Indoor Challenge “Omaha” 10th Midwest Indoor Challenge “Omaha” 53rd Midwest Indoor Challenge “Omaha”
1st in Ohio at the BFGTG 8th in Ohio at the BFGTG
1st and 2nd place in the MICA summer series after 4 comps “MI” 1st and 2nd place in the Twisted Crawlers winter series “MI”
3rd in Indiana at the Rox Box spring series “IN” 10th place TSC point series “IN”
All the parts used in this kit are machined from high quality materials The aluminum sides are CNC Laser cut from lightweight solid aluminum plate., Chassis stays (both square and round) are machined from solid 6061-T6 Aluminum bar. Dig tray is made from genuine "Lexan" shatter resistant plastic. Lastly the TAG's Double Reverse Triangulation Skid Plate is CNC machined from solid Delrin plate.
Item includes:
(2) Aluminum Chassis Plates (1) Delrin Skid Plate (2) Round aluminum Shock Stays (2) Square Aluminum Chassis Stays (1) Lexan DIG Tray & Stainless Steel Hardware Kit
Here is a little video showing what it can do...
http://www.skunkracing.net/twisted/XJFarmer1_1.3.08.wmv
http://www.youtube.com/watch?v=f1cDZcXH40o&feature=channel_page
http://www.youtube.com/watch?v=rv2BfBCR124&feature=channel
http://www.youtube.com/watch?v=JSz2CwEroFc
http://www.youtube.com/watch?v=WVhZGB86ezw
The design was created and honed by EEM Team Driver Aaron Betzner. Aaron is better known to us all on the boards as The Eye.
Aaron has done a great job on the TAG design. The Tag is one of the narrowest chassis on the market. Coming in at right around the 2 inch mark. This chassis is built to get through tight spots. It’s incredibly compact design allows it to move through and over obstacles like no other chassis in it’s class.
The TAG chassis features an aluminum TVP chassis design, built around a CNC machined Delrin Skid Plate. The lower arms are set up in the now standard double reverse triangulation.
Competition proven in several comps on both the state and national level. The tag has proven itself built on both Berg and Hot Racing axles.
Here is a sample of some of it's placings:
2008 2nd East Coast 2.2 indoor challenge “PA” 3rd East Coast 2.2 indoor challenge “PA”
2009 6th Midwest Indoor Challenge “Omaha” 10th Midwest Indoor Challenge “Omaha” 53rd Midwest Indoor Challenge “Omaha”
1st in Ohio at the BFGTG 8th in Ohio at the BFGTG
1st and 2nd place in the MICA summer series after 4 comps “MI” 1st and 2nd place in the Twisted Crawlers winter series “MI”
3rd in Indiana at the Rox Box spring series “IN” 10th place TSC point series “IN”
All the parts used in this kit are machined from high quality materials The aluminum sides are CNC Laser cut from lightweight solid aluminum plate., Chassis stays (both square and round) are machined from solid 6061-T6 Aluminum bar. Dig tray is made from genuine "Lexan" shatter resistant plastic. Lastly the TAG's Double Reverse Triangulation Skid Plate is CNC machined from solid Delrin plate.
Item includes:
(2) Aluminum Chassis Plates (1) Delrin Skid Plate (2) Round aluminum Shock Stays (2) Square Aluminum Chassis Stays (1) Lexan DIG Tray & Stainless Steel Hardware Kit
Here is a little video showing what it can do...
http://www.skunkracing.net/twisted/XJFarmer1_1.3.08.wmv
http://www.youtube.com/watch?v=f1cDZcXH40o&feature=channel_page
http://www.youtube.com/watch?v=rv2BfBCR124&feature=channel
http://www.youtube.com/watch?v=JSz2CwEroFc
http://www.youtube.com/watch?v=WVhZGB86ezw
